Coral 10'5 inflatable SUP set

A complete ready to Go-SUP package. The highly colourful Mistral Coral takes inspiration from tropical reefs. The Coral is the ultimate family board. Incorporates a printed EVA non slip deck, nose scuff pad towing D-ring, rear D-Ring leash point, single universal fin box and moulded side bite fins. The Coral is nimble and stable. Includes adjustable reef print on polycarbonate blade and a carbon composite shaft, dual action pump, fin, coiled leash, repair kit and wheeled travel bag. Incorporates advanced 4.75” / 12cm deck to hull DSFL material which provides some unique convenience and performance features.

length

317,5 cm

width

84 cm

thick

12 cm

weight

8,54 kg

volume

240 lt

Double Skin Fusion Layer Drop Stitch
Genuine 13,600 threads per inch
2,600 more threads than conventional
Front mounted cargo elastics
Centre of gravity lowered improving your ability to balance
Windage is lowered
Less ‘corky’ on account of lowered volume
Inflation and deflation time reduced
Folding time is reduced and easier
Low stowage volume
Lowered weight
Less material used in manufacture
Universal fin box for universal fins
Patterned EVA foam non-slip
Bow protector
Towing D-Ring
Carry handle
Leash ring
Robust construction
Repair kit
Adjustable Paddle
Reef print polycarbonate blade / carbon comp shaft
Dual action pump
Fin included
Coiled leash included
Wheeled travel bag

YOU ARE A NOVICE TO INTERMEDIATE PADDLER
The Mistral Coral 10’5 x 31” x 4.75” (320cm x 79cm x 12cm) x 240L inflatable SUP offers nimble paddling and stability and suits novice paddlers. With 240L the Coral can support riders optimally to around 80kg.

PRODUCT COMPOSITION and CONSTRUCTION

Double Skin Fusion Layer (DSFL) Technology Drop Stitch Fabric. Uses 13,600 stitches per inch over the usual 12,000 making the board stiffer for no added weight gain. SUP board consists of polyvinyl chloride (PVC) woven polyester drop stitch construction. Non-slip material is composed of ethylene-vinyl acetate (EVA) foam. Contact adhesive consisting of poly-chloroprene polymers.

Elastic bungee cord composed of both natural and manufactured rubber, poly carbonate fin-box, stainless steel retainers. Polycarbonate paddle blade and aluminium shaft.

The Coral is 4.74” / 12cm deck to hull in thickness, providing unique advantages over 6” / 15cm thick boards, namely; your centre of gravity is lowered improving your ability to balance, windage is lowered making the board more manageable in winds, the board is less ‘corky’ on account of lowered volume and reduced height above the water, inflation and deflation time is reduced, folding time is reduced and easier, a light board is made possible, stowage volume is reduced and less material is used in the manufacturing. STOCK ADVICE Avoid storing in direct high UV sunlight to prolong material longevity. Rinse with fresh water to evacuate all salt crystals. When dry, store in dry, well ventilated place avoid humid heat sources.

TESTS
Developed and tested by our design team in Holland and the UK. Components have been tested to ensure they meet nominal expectations of performance within reasonable expectations of form, function and budget.

SUP technology has advanced over the years, however require the end-user to take good care through responsible ownership. The advantages of iSUP ownership are clearly related to convenience of transportation and storage, cost and low impact use.

Rinse salt water from board after use with fresh
Towel or air dry before stowage
Do not drag over rough surfaces
Store out of strong UV
Do not store in a humid place
Avoid sand falling into the valve
Do not over inflate
Inflate within (-) 2 psi of recommendation
Do not store fully inflated
Reduce to 5psi if storing inflated
Do not store when wet
Fold neatly avoiding fin box

If you’re getting your iSUP out of storage after a long winter, it’s advised you take some time to do some basic maintenance checks at home.

Inflate to recommended PSI
If stored deflated check fold lines are OK
Make a close inspection of the seams for any leaks
Do same with the valve and re-tighten using the valve spanner
Check fin box and fin fitment
Check D-Ring connections
Check deck pad
Check for any discolouration due to bacteria
Wash and scrub board with cool soapy water
Observe for any ‘bubbling’ caused by leaks
Make a note of PSI and leave for 48hrs
Check PSI and note any lose of pressure
Investigate any issues and address / fix
For minor none seam leak issues fix using repair kit
Seam failure often requires professional input
Consider contacting inflatable boat repairers

Pro Level

Stability

Agility

Speed

Repair kit includes

PVC patches, PVC contact glue, valve spanner.

Mistral return of goods

For all watersport related articles: Inflatable, Hardboard, SUP Windsurf incl. sails and paddles we will give a transition period of 30 days where you can return the product costless within Europe if you change your mind or product is not as expected. Product need to be returned in new condition and Mistral is not responsible for any usage or damage within this period.